Front Wheels

This is a workhorse of a tubeless compatible rim brake front wheel. We hand build this front wheel with the Shimano T3000 quick release hub onto an Alex AT470 tubeless compatible/ clincher rim. Stainless black 2.0 spokes and black brass nipples. 3 cross, 32 hole. Great with tires from 28 to 48.

This is the front wheel of the COMPLETE WHEEL SET

FRONT WHEEL SPECS:

Rim Model: Alex AT470 Clincher / Tubeless Compatible

Rim Size: 700c

Rim Construction: Double walled, pinned joint tubeless compatible road and cyclocross

Rim OD Width: 22mm

Rim ID Width: 17mm

Rim Depth: 22mm

FT Hub Spacing: 100mm

FT Wheel Weight: 1020 grams

FT Hub Axle: 9mm hollow

Valve Type: Presta

Tubeless Tape: Included and installed. (Ready for clincher tires as well)

Build Spec: 32h, 3 Cross

Need just the rear wheel? Find that HERE

Want a cog and locking to go with this set? Check out this affordable option!

TRACK COG AND LOCKRING SET 16T

HAND BUILT TO ORDER. Ships in 3-5 business days.

Our special high flange sealed bearing front hub hand built onto Sun Ringle CR18 rim. Stainless DT 2.0 spokes and brass nipples. 3 cross, 32 hole.

FT Spacing: 100mm

FT Weight: 1020 grams

FT Axle: 9mm

HAND BUILT TO ORDER. Ships in 3-5 business days.

If you are looking for an all-purpose single speed front wheel that will last, this is it. We hand build this wheel with our special super smooth sealed bearing high flange single speed hub onto a Sun Ringle CR18 rim. Black stainless 2.0 spokes and black brass nipples. 3 cross, 32 hole.

FRONT WHEEL SPECS:

2 High Quality Sealed Bearings

FT Spacing: 100mm

FT Weight: 1020 grams

FT Axle: 9mm

Valve Type: Presta

Bolt-On - Nutted 

Handsome Handbuilt Wheelhouse front wheel with the black machined wall Sun CR18 double wall reinforced eyelet rim, Shimano RS400 quick release front hub, stainless spokes and brass nipples, 36 hole, 3 cross lacing pattern.

RIM SPECS:

Sun CR18 Black, Machined Wall for Rim Brake, Double Wall, Reinforced Eyelets, 700c, 36H, Presta Valve, Width Outer 22.5mm, Width Inner 18mm, Recommended Tire Size 28-45c

HUB SPECS:

Shimano RS400 11 Speed Compatible, Alloy Shell, 36H, 100mm Spacing, CrMo Axle, Quick Release

WEIGHT: 2lb, 4oz (with QR Skewer)

Handbuilt at Handsome. Ships in 7-10 days.

This wheel is handbuilt at Handsome Wheelhouse in Minneapolis, MN. The tubeless ready DT Swiss R460 rim is slightly wider at 23mm (outside) and 18mm (inside), which makes it ideal for tires 28-48 in width. Great for rim brake commuter, touring, adventure, and cyclocross or tracklocross bikes.

SPECS:

Weight: 964g

Rim: DT Swiss R460 Machined Wall, 32h, Black, Presta Valve

Hub: Handsome Premium High Flange Sealed Bearing Hollow Axle Bolt-On Track Hub, Black, 32h

Spokes: Sapim 288 Leader 2.0 J Bend Black

Nipples: Sapim Brass 2.0 Polyax

Assembly: Handbuilt to order at Handsome Wheelhouse

Warranty: 2 Year

Tubeless Ready: Tubeless tape pre-installed, (clincher tires and tubes work great)

Tubeless Valves: Purchase Separately

Built to order. Ships in 1-2 business days.

Handbuilt at Handsome. Ships in 7-10 days.

This is a workhorse of a tubeless compatible rim brake single speed wheel. We hand build this wheel with our special sealed bearing front hub onto Alex Adventure 2 tubeless compatible/ clincher rims. Stainless black 2.0 spokes and silver brass nipples. 3 cross, 32 hole. Great with tires from 30 to 50.

FRONT WHEEL SPECS:

Rim Model: Alex Adventure 2 Clincher / Tubeless Compatible

Rim Size: 700c

Rim Construction: Double walled, pinned joint tubeless compatible road and cyclocross

Rim OD Width: 26.2mm

Rim ID Width: 21mm

Rim Depth: 17.8mm

FT Hub Spacing: 100mm

FT Wheel Weight: 1077 grams

FT Hub Axle: 9mm hollow

Valve Type: Presta

Tubeless Tape: Included and installed. (Ready for clincher tires as well)

Build Spec: 32h, 3 Cross

Tubeless Valves: Purchase Separately Here

Need just the rear wheel? Find that HERE

 Want The Front And Rear Set At A Better Deal?  Go Here

Handbuilt at Handsome. Ships in 7-10 days.

This is a workhorse of a tubeless compatible rim brake single speed wheel. We hand build this wheel with our special sealed bearing front hub onto Alex Adventure 2 tubeless compatible/ clincher rims. Stainless black 2.0 spokes and silver brass nipples. 3 cross, 32 hole. Great with tires from 1.5 to 2.3.

FRONT WHEEL SPECS:

Rim Model: Alex Adventure 2 Clincher / Tubeless Compatible

Rim Size: 26"

Rim Construction: Double walled, pinned joint tubeless compatible

Rim OD Width: 26.2mm

Rim ID Width: 21mm

Rim Depth: 17.8mm

FT Hub Spacing: 100mm

FT Wheel Weight: 1022 grams

FT Hub Axle: 9mm hollow

Valve Type: Presta

Tubeless Tape: Included and installed. (Ready for clincher tires as well)

Build Spec: 32h, 3 Cross

Tubeless Valves: Purchase Separately Here

Need just the rear wheel? Find that HERE

 Want The Front And Rear Set At A Better Deal?  Go Here

Your basic upgrade to a dynamo lighting system starts here. This is a great handbuilt wheel that we sell separately as a replacement for your standard front rim brake bike to convert to the exciting world of dynamo. We chose each piece to be quality without breaking the bank as a good entry level dynamo wheel. This is the "good" in our Good-Better-Best offerings.

MAKE IT A COMPLETE SET

If you already have a bike and want to begin running dynamo lighting, this is a great starting platform, but you'll need the lights also.

For front lights, pair this wheel with the Busch & Muller IQ-XS Front Light ($124.95), or Foxeye 40 Lux Classic Front Light  ($49.95).

For rear lights, pair this wheel with the Busch & Muller Toplight Line Brake Plus Rear Light (for rack mount), or Busch & Muller Secula Plus Rear Light (fender mount). or the Busch & Muller Secuzed Rear Light (seat post mount).

SPECS

RIM:

• Sun Ringle CR18 700c Double Walled Reinforced Eyelet
• 32 Hole
• Machined Braking Surface For Rim Brake
• Presta Valve
• Weight - 460 grams (1.01 lbs)
• Recommended Tire Sizes: 700 x 25-38 Clincher

HUB:

• Shimano Panasonic 6V, 3W, Quick Release, 100mm
• Comes With Wire Connecting Clip
• Skewer not included
• Weight - 564 grams (1.24 lbs)

SPOKES / NIPPLES:

• Stainless Steel 2.0 / Brass

Your upgrade to a standard dynamo lighting system starts here. This is a great handbuilt wheel that we sell separately as a replacement for your standard front rim brake bike to convert to the exciting world of dynamo. There is nothing entry level about any of the components of this wheel, but we chose each piece to be quality without breaking the bank. Pair this wheel with our Sun Ringle CR18 Shimano Alfine Internal 8 Speed Rear Wheel for a perfect matching pair.

If you already have a bike and want to begin running dynamo lighting, this is a great starting platform, but you'll need the lights also. Pair this wheel with the Busch & Muller IQ-XS Front Light and Busch & Muller Toplight Line Brake Plus Rear Light (for rack mount), or Busch & Muller Secula Plus Rear Light (seat post or fender mount). Buy them all together as a complete package and at a discount with the Standard Dynamo Upgrade Kit.

RIM:

• Sun Ringle CR18 700c Double Walled Reinforced Eyelet
• 32 Hole
• Machined Braking Surface For Rim Brake
• Presta Valve
• Weight - 460 grams (1.01 lbs)
• Recommended Tire Sizes: 700 x 25-38 Clincher

HUB:

• Shimano DH-3N72 6V, 3W, Quick Release, 100mm
• Comes With Wire Connecting Clip
• Weight - 564 grams (1.24 lbs)

SPOKES / NIPPLES:

• Stainless Steel 2.0 / Brass

HAND BUILT! Ships in 3-5 business days.

Your entry into the awesome world of dynamo lighting starts here. This is a great handbuilt wheel that we sell separately as a replacement for your standard front rim brake bike to convert to generating all the power you need for special front and rear dynamo lights. We chose each piece to be quality without breaking the bank as a good entry-level dynamo wheel. This is the "good" in our Good-Better-Best offerings.

TUBELESS COMPATIBLE 

What does that mean? You can run just a normal tube and tire on this rim. It is Pre-taped and you don’t need an additional rim strip. However, it is also ready for a tubeless tire system (valves and sealant sold separately).

MAKE IT A COMPLETE SET

If you already have a bike and want to begin running dynamo lighting, this is a great starting platform, but you'll need the lights also.

For front lights, pair this wheel with the Busch & Muller IQ-XS Front Light ($124.95), or Foxeye 40 Lux Classic Front Light  ($49.95).

For rear lights, pair this wheel with the Busch & Muller Toplight Line Brake Plus Rear Light (for rack mount), or Busch & Muller Secula Plus Rear Light (fender mount). or the Busch & Muller Secuzed Rear Light (seat post mount).

SPECS

RIM:

• Alex AT470 Tubeless Compatible 700c Double Walled Reinforced Eyelet
• 32 Hole
• Machined Braking Surface For Rim Brake
• Presta Valve
• Weight - 460 grams (1.01 lbs)
• Recommended Tire Sizes: 700 x 28 - 45 Clincher
• Tubeless Rim Tape: Pre-Installed (good for tubes also)

HUB:

• Panasonic 6V, 3W, Quick Release, 100mm
• Comes With Wire Connecting Clip
• Skewer Not Included
• Weight - 560 grams (1.23 lbs)

SPOKES / NIPPLES:

• Black Stainless Steel 2.0 / Brass

COMPLETE WHEEL WEIGHT: 1295g

IN STOCK! Ships next business day.

Your upgrade to a dynamo lighting system starts here. This is a great handbuilt wheel that we sell separately as a replacement for your standard front rim brake bike to convert to the exciting world of dynamo. We chose each piece to be quality without breaking the bank as a good mid-level dynamo wheel. This is the "better" in our Good-Better-Best offerings.

TUBELESS COMPATIBLE 

 What does that mean? You can run just a normal tube and tire on this rim. It is Pre-taped and you don’t need an additional rim strip. However, it is also ready for a tubeless tire system (valves and sealant sold separately).

MAKE IT A COMPLETE SET

If you already have a bike and want to begin running dynamo lighting, this is a great starting platform, but you'll need the lights also.

For front lights, pair this wheel with the Busch & Muller IQ-XS Front Light ($124.95), or Foxeye 40 Lux Classic Front Light  ($49.95).

For rear lights, pair this wheel with the Busch & Muller Toplight Line Brake Plus Rear Light (for rack mount), or Busch & Muller Secula Plus Rear Light (fender mount). or the Busch & Muller Secuzed Rear Light (seat post mount).

SPECS

RIM:

• Alex AT470 Tubeless Compatible 700c Double Walled Reinforced Eyelet
• 32 Hole
• Machined Braking Surface For Rim Brake
• Presta Valve
• Weight - 460 grams (1.01 lbs)
• Recommended Tire Sizes: 700 x 28 - 45 Clincher

HUB:

• Shimano DH-3N72 6V, 3W, Quick Release, 100mm
• Comes With Wire Connecting Clip
• Skewer Included
• Weight - 564 grams (1.24 lbs)

SPOKES / NIPPLES:

• Stainless Steel 2.0 / Brass

Your upgrade to a mid level dynamo lighting system starts here. This is a premium handbuilt wheel that we sell separately as a replacement for your standard front rim brake bike to convert to the exciting world of dynamo. The rim is USA built in Michigan and is perfect for tough touring, commuting, or gravel. The Shimano dynamo hub is a solid choice for commuters, gravel, or touring with average speeds under 17 MPH. Minimal drag and great power output at lower speeds.

If you already have a bike with 26" wheels and want to begin running dynamo lighting, this is a really great starting platform, but you'll need the lights also. Pair this wheel with the Busch & Muller IQ-XS Front Light and Busch & Muller Toplight Line Brake Plus Rear Light (for rack mount), or Busch & Muller Secuzed Rear Light (seat post or fender mount).

RIM:

• Velocity Dyad 26" MSW Silver
• 32 Hole
• Machined Braking Surface For Rim Brake
• Presta Valve
• Weight - 460 grams (1.01 lbs)
• WIDTH:24mm
• HEIGHT:22mm
• Recommended Tire Sizes: 26 x 1.25 - 26 x 2.1 Clincher

  HUB:

• Shimano DH-3N72 6V, 3W, Quick Release Skewer, 100mm
• Comes With Connector Cap
• Weight - 595 grams

  SPOKES / NIPPLES:

• Stainless Steel 2.0 / Brass

Handbuilt at Handsome, 3x Lacing Pattern, 2 Year Warranty

Want to get into the world of dynamo lighting with authority. This is a perfect start. Great dynamo compatible upgrade for any 700c modern rim brake all-road, cyclocross, city commuter, or touring bike. Handsome Handbuilt Wheelhouse wheelset with the Velocity Dyad double wall made in USA rim, Shimano DH-3N72 Dynamo front hub, stainless spokes and brass nipples, 32 hole, 3 cross lacing pattern.

RIM SPECS:

Velocity Dyad Black, Machined Wall for Rim Brake, Double Wall, 700c, 32H, Presta Valve, Width Outer 23.8mm, Width Inner 18.4mm, Recommended Tire Size 28-45c, Clincher Tires Only

FRONT HUB SPECS:

Shimano DH-3N72 Dynamo, Alloy Shell, 32H, 100mm Spacing, CrMo Axle, Quick Release Skewer Included

TOTAL WEIGHT: 3lb, 1oz (1389g) (Skewer Included)

Your upgrade to a top level dynamo lighting system starts here. This is a premium handbuilt wheel that we sell separately as a replacement for your standard front rim brake bike to convert to the exciting world of dynamo. This is one of the most efficient dynamo hubs on the market. Its power output to drag ratio consistantly tests lowest against all of its competitors. If you want the best, this is the way to go. Pair this wheel with our Sun Ringle CR18 Cassette 11 Speed Compatible Rear Wheel (7-11 speeds) for a perfect matching pair.

If you already have a bike and want to begin running dynamo lighting, this is a superb starting platform, but you'll need the lights also. Pair this wheel with the Busch & Muller IQ-XS Front Light and Busch & Muller Toplight Line Brake Plus Rear Light (for rack mount), or Busch & Muller Secuzed Rear Light (seat post or fender mount). Buy them all together as a complete package and at a discount with the Standard Dynamo Upgrade Kit.

RIM:

• Sun Ringle CR18 700c Double Walled Reinforced Eyelet
• 32 Hole
• Machined Braking Surface For Rim Brake
• Presta Valve
• Weight - 460 grams (1.01 lbs)
• Recommended Tire Sizes: 700 x 25-38 Clincher

HUB:

• Schmidt SON 28 Nabendynamo 6V, 3W, Hex Head Skewer, 100mm
• Comes With Wire and Spade Connectors
• Weight - 564 grams (1.24 lbs)

SPOKES / NIPPLES:

• Stainless Steel 2.0 / Brass

Your upgrade to a top level dynamo lighting system starts here. This is a premium handbuilt wheel that we sell separately as a replacement for your standard front rim brake bike to convert to the exciting world of dynamo. The rim is USA built in Michigan and is perfect for tough touring, commuting, or gravel. This is one of the most efficient dynamo hubs on the market. Its power output to drag ratio consistantly tests lowest against all of its competitors. If you want the best, this is the way to go.

If you already have a bike with 26" wheels and want to begin running dynamo lighting, this is a superb starting platform, but you'll need the lights also. Pair this wheel with the Busch & Muller IQ-XS Front Light and Busch & Muller Toplight Line Brake Plus Rear Light (for rack mount), or Busch & Muller Secuzed Rear Light (seat post or fender mount).

RIM:

• Velocity Dyad 26" MSW Silver
• 32 Hole
• Machined Braking Surface For Rim Brake
• Presta Valve
• Weight - 460 grams (1.01 lbs)
• WIDTH:24mm
• HEIGHT:22mm
• Recommended Tire Sizes: 26 x 1.25 - 26 x 2.1 Clincher

  HUB:

• Schmidt SON 28 Nabendynamo 6V, 3W, Hex Head Skewer, 100mm
• Comes With Wire and Spade Connectors
• Weight - 564 grams (1.24 lbs)

  SPOKES / NIPPLES:

• Stainless Steel 2.0 / Brass